The electronic pressure gauges of the series DMG 3 measures relative-, difference- and absolut
pressure and velocity of flow in air and non aggressive gases.
These measured values are directed to a 0-10 V analog output. They are shown on a 3,5-digit LED-display with a
figurehight of 14.2 mm.
Because of used piezoresistive cells the pressure gauge reaches high reliability and precision. The aluminium enclosure
has a high mechanical stability and good EMC- properties.
It is suitable for installation into a control switchboard. The user is warned against overload pressure by a red LED on
the front. An individual calibration certificate belongs to every delivered pressure gauge.
options:
two switch outputs with LED for each on the front
4-20 mA - transmitter
RS 232 - interface
square rout output for measuring velocity of flow
applications:
control of airblowers
supervsion of airfilters
mechanical- and system engineering
environmental technology
liquid level control
pressure control in cleanrooms or spray chambers
medical engineering
technical data DMG 3 (difference pressure):
pressure range [mbar]
pressure range [kPa]
max. over- pressure [mbar]
linear error max. [ % F.S.]
tempera-ture error max. [ % F.S.]
0-50 C
long-term- stability
[ % F.S.]
repeat-precisi on [ % F.S.]
time of response
0-10 V output [ms]
0 - 2.5
0 - 0.25
250
0.8
2
2
0.3
2
0 - 5
0 - 0.5
250
0.8
1
1
0.3
2
0 - 10
0 - 1
250
0.8
1
0.5
0.2
2
0 - 25
0 - 2.5
375
0.7
1
0.1
0.1
2
0 - 50
0 - 5
500
0.7
1
0.1
0.1
2
0 - 100
0 - 10
750
0.5
1
0.1
0.1
2
0 - 250
0 - 25
triple
0.5
1
0.1
0.1
2
0 - 500
0 - 50
triple
0.5
1
0.1
0.1
2
0 - 1000
0 - 100
triple
0.5
1
0.1
0.1
2
technical data DMG 3 (absolut pressure):
700-1100
10 - 110
triple
0.9 mbar
2.3 mbar
0.1
0.1
2
technical data DMG 3 with electronic correction of linear error (difference pressure):
0 - 100
0 - 10
750
0.2
1
0.1
0.1
2
0 - 250
0 - 25
triple
0.2
1
0.1
0.1
2
0 - 500
0 - 50
triple
0.2
1
0.1
0.1
2
0 - 1000
0 - 100
triple
0.2
1
0.1
0.1
2
For special ranges please enquire.
operation temperature range:
-20 to +50 C
hysteresis:
maximum 0,1%
medium:
air and all non aggressive gases
power supply and output-signals:
Us optionally:
15-30 VDC or 230 VAC +- 10 %
analog output:
0-10 V
load:
RL >= 2 k
connections:
electrical:
plug with 7-pole depht clamp for 0,14-1,5 mm2
pneumatic:
2 connections for tubes with 4 mm diameter inside
optionally two switching outputs:
loadability:
max. 230 VAC 1A
switch hysteresis:
ca. 2 % F.S.
optionally RS-232 interface:
data format:
8 bit without parity-bit, 1 stop-bit
baudrate:
9600
handshake:
xon / xoff
optionally 4-20 mA transmitter:
analog output:
4-20 mA or 0-20 mA
RB >= 20 ... 100
optionally square root output:
DMG 3 can measure and display the velocity of flow if it is completet with a square root output.
Therefor a measuring blend or a Prandtl-tube or accumulation-tube must be used.